 |
 |
|
Power Cords |
|
 |
Power
Cord with Power Connector For connecting Flexilight to power source. Made for rounded Flexilight and rectangular Flexilight. |
 |
Power Cord with
Housing Clamp Strong water-proof power cord. The housing clamp needs to be filled with silicone glue and tightened with screws. Users can assemble the housing clamp. |
 |
Power
Cord with PVC Connector Convenient water-proof power cord connection. The PVC connector needs to be glued to the Flexilight with silicone glue. Users can assemble the PVC connector with ease. |
 |
Power
Cord with Molded Connection Slimmer and non-removable water-proof power cord connection. The molded connection is made by the factory and is cannot be assembled by the user. |
 |
Power
Cord with Switch A power cord with an on/off switch, which enables the easy on and off of a Flexilight decoration or a Flexi-Art without disconnecting the power source. |
|
Connectors |
|
|
|
Easy
Splice Connector For connecting 2 pieces of Flexilight in a less visible way, usually used with a shrinkable tube. |
 |
Splice
Connector For Round Flexilight For connecting 2 pieces of round Flexilight. |
 |
Splice
Connector For Rectangle Flexilight For connecting 2 pieces of rectangle Flexilight |
 |
PVC
Connector Convenient water-proof connection between 2 pieces of Flexilight. The PVC connector needs to be glued to the Flexilight with silicon glue. |
 |
Housing
Clamp Strong water-proof connection between 2 pieces of Flexilight. The Housing Clamp needs to be filled with silicon glue and tightened with screws. |
 |
T-Connector For connecting 3 pieces of Flexilight into a T-shape. Only available for Instant and Chasing. |
 |
L-Connector For connecting 2 pieces of Rectango Flexilight into a 90 degree angle. Available only for Rectango. |
 |
B22
Power Connector For connecting Flexilight to a Pearl Light socket. It enables the combination of Flexilight and Pearl Light decoration. |
|
End Caps |
|
|
|
End
Cap In a segment of Flexilight, one end is the power cord, the other end must be covered with the End Cap to prevent the user from touching the tin wires carrying the electricity. |
 |
Molded
End Cap Non-removable and water-proof end cover for each segment of Flexilight. The Molded End Cap is made at the factory and cannot be assembled by the user. |
|
Tie Straps |
|
|
|
Tie
Straps For fixing Flexilight on a grid, rope, or frame. The tie straps are especially good for making artwork or signs with Flexilight. |
|
Suction Cups |
|
|
|
Suction
Cups Used with the Tie Straps, the Suction Cups allowing attaching Flexilight to smooth flat surfaces. |
|
Mounting Clips |
|
|
|
Mounting
Clip For Round Flexilight Nailed on wood/stone/concrete surface, or glued to iron/glass surface, for fixing a curved Flexilight. |
 |
Mounting
Clip For Rectango Flexilight Nailed on wood/stone/concrete surface, or glued to iron/glass surface, for fixing a curved Flexilight. |
|
Channel |
|
|
|
Channel Nailed on wood/stone/concrete surface, or glued to iron/glass surface, for fixing a straight Flexilight. |
|
Y Cords |
|
|
|
Y
Cords For connecting 2 pieces of Flexilight to the same power source or controller. Available for all models except Multi-Chasing, Super-Brite, Square and Rectango Rainbow Flexilight. |
|
Extension Splice |
|
|
|
Extension
Splice For elongating the connection of 2 pieces of Flexilight. Extension Splice is suitable for connecting several parts of a Flexilight decoration, which have to separated at a certain interval, while maintaining the lighting effect at the same place. |
|
Extension Cords |
|
|
|
Extension
Cords For elongating the length between Flexilight and a power cord. Available for all models except Square and Rectango Rainbow Flexilight. |
